APPLIANCE MOULD (Total 13 Products)

MEMORY CARD DRAWER CLIPPER

CI3545-LKM STANDARD

PART DEMOULDING WITH SECONDARY RUNNER
HAS NO EJECTOR MARK ON PART
AVOID TO SCRATCH
SUPPOT PILLAR DISTRIBUTE AS NEEDED
DEFORM EASY TO CREAT

2015-02-24

LED LIGHT TOP CASE GLOSSING MIRROR

FCI2030---LKM STANDARD

SLIDER IN CAVITY,NOT IN COR
MOLD TEMP TO BE 120
CAV AND COR TO BE MIRROR GLOSSING
FLAT THIMBLE LAYOUT AT RIBS
DRAFT ANGLE AT RIB TO BE NEEDED

2015-02-23

FASTEN BRACKET OF MOTOR DEVICE FRONT CAS

CI4055/LMK STANDARD

PART COLOR:GRAY--EASY TO MAKE WELD LINE
PIN MARK FLUSHED 0.1MM TO PART SURFACE
MOLDING CYCLE IS 15 SECOND
MOLD FINISHED PERIOD 10 DAYS

2015-02-24

POWER SOCKET CONVERT ADAPTOR

FCI4050/LMK STANDARD

HARDWARE PIN OVER MOLDING
ELIMINATE WELD LINE BETWEEN HOLES
DISSIPATE HOLES DIAMETER IS 1.20MM
MOLD BASE MUST BE STRONGER AVOILD FLASH

2015-01-25

SLIDING DUIDE RAIL BRACKET

CI2030/LKM STANDARD

PIN 0.05 HIGH THAN COR SURFACE
KEY BOSSES POSITIONAL TOLERANCE TO BE 0.05
ADJUSDT INJECTION MACHINE PARAMETER

2015-01-23

BEZEL OUTLET SPLIT FLOW

GCI3545/LKM STANDARD

LIFTER MUST TO MOVE SMOOTH
KEEP MOLD HIGH TEMP TO GUARANT BEST APPEARANCESURFAC
AVOID TO SCRATCH
SUPPOT PILLAR DISTRIBUTE AS NEEDED

2015-01-22

VACUUM CLEANER INNER CAS

BI5560/LKM STANDARD

GAS TRAPED WHEN MOLD PROCESSING
AIR POPPET VAVLE MOVE BEFORE MOLD RELEASE

2015-01-06

ADVANCED STRAIGHT WALL ANTENNA TUBE

DAH4045/LKMSTANDARD

DIRECT SPRUE GATE CONVERT TO ROUND GATE
HAS NO WELD LINE MARK
USE FIXTURE TO STAMP OUT ROUND GATE
PART LINE NO APPEAR

2015-01-05

ALARM TOP BOTTOM HOUSING

BI3540/LKM STANDARD

HIGH INJECTION MOLD TEMPARETURE
SHRINKAGE MARK
AIR TRAPPING
WELD LINE
STRESS MARK...

2015-01-05

INVOLUTED HELICAL DRIVING GEAR

Futaba2530

Total runout0.02
Tolerance of form and position 0.05
Concentricity0.02
Position0.02

2015-01-05

ELECTIR WELDING MACHINE OUTER CABINET

FAI7080/LKM STANDARD

Poor Liquidity
MAIN WALL THICKNESS IS 3MM
EASY TO SHORT SHOT
EASY TO SHRINK
EASY TO SHOT MARK

2015-01-05

WATER PIPE ADAPTER CONVERTER

CI3035---LKM STANDARD

EASY TO FLOW;EASY TOFLASH

2015-01-01

DELIVER LEVER TRIGGER HOLDER

FCI2530/LKM STANDARD

8-CRITICAL Dimension tolerance to be 0.04; 4-Geometric tolerance to be 0.05

2015-01-23